Effect of ZnO loading to activated carbon on Pb(II) adsorption from aqueous solution Original Research Article

The effect of zinc oxide loading to granular activated carbon on Pb(II) adsorption from aqueous solution was studied in comparison with zinc oxide particles and oxidized activated carbon. Cu(II), Cd(II) and nitrobenzene were used as reference adsorbates to investigate the adsorption. The BET surface area and point of zero charge (pHPZC) in the aqueous solution were measured for the adsorbents. The adsorption isotherms were examined to characterize the adsorption of heavy metals and organic molecules. The heavy metal adsorption was improved by both the zinc oxide loading and the oxidation of activated carbon. In contrast, the adsorption of nitrobenzene was considerably reduced by the oxidation, and slightly decreased by the zinc oxide loading. The zinc oxide loading to the activated carbon was found to be effectively used for the Pb(II) adsorption whereas only a part of surface functional groups was used for the zinc oxide particles and the oxidized activated carbon. From the experimental results, the surface functional groups responsible for the Pb(II) adsorption on the zinc oxide loaded activated carbon were considered to be hydroxyl groups that formed on the oxide, while those on the oxidized activated carbon were considered to be carboxylic groups.