Moderate anisotropy in the electrical conductivity of bulk MWCNT/epoxy composites Original Research Article

Bulk aligned multi-walled carbon nanotube films and their epoxy composites were prepared and their DC and AC conductivity studied. Nanotube films of up to 2 mm thickness were grown by catalytic chemical vapor deposition. Composites of nanotubes were made by infiltrating the films with a commercial epoxy. DC electrical resistivities in the axial direction of as-grown and purified films were found to be ∼1.2 Ωmm and ∼3.4 Ωmm, respectively. For the transverse direction the resistivity values were higher only with a factor of ∼2. In the case of composites, anisotropy is more pronounced showing more than an order of magnitude higher resistivity in the transverse direction (∼71.4 Ωmm) as compared to the axial value (∼4.2 Ωmm). AC behavior of the films investigated between 1 MHz and 3 GHz shows the presence of inductive and capacitive components at frequencies above ∼100 MHz. The moderate anisotropy for both DC and AC electrical properties are explained on the basis of the films’ structure combined with percolation theory and equivalent circuit models.