High-temperature vapor deposition polymerization polyimide coating for elimination of surface nano-flaws in high-strength carbon fiber Original Research Article

The effect of polyimide coatings on the filament tensile strength of high-strength polyacrylonitrile-based carbon fiber was studied by using dip and high-temperature vapor deposition polymerization (VDP) coating processes. Unlike a VDP on a cold substrate, high-temperature VDP has the potential to directly synthesize and isotropically deposit a polyimide, from diamine and dihydride monomers without any by-products, on a substrate heated up to 200 °C. The average filament tensile strength of the flaw-sensitive carbon fiber improved with all the polyimide coatings used. Nevertheless, for the same monomers, the high-temperature VDP coating process was advantageous for high-efficiency surface flaw healing compared to the dip-coating process, resulting in a 25% increase in the average tensile strength of the carbon fiber. These results were evident not only for the carbon fibers without artificial nano-notches but also for those with artificial notches less than 30 nm in depth. Thus, we clearly showed the potential for the VDP polyimide coating to heal surface nano-flaws of the carbon fiber. The different infiltrations of the coating into nano-notches and its effect on the filament tensile properties were characterized, as well as discussing the impact of the VDP coating with an interlayer between the coating and the fiber.