The importance of conductivity gradients in ground-based field-aligned current studies Original Research Article

Magnetosphere-ionosphere coupling is achieved primarily through magnetic field-aligned currents. Such currents are difficult to measure directly and are usually inferred from satellite magnetometer recordings or from ground-based measurements of the divergence of ionospheric electric fields. The latter technique requires a knowledge of the ionospheric conductance distribution. Although it is possible to obtain the ionospheric electric field distribution over large spatial areas with good temporal resolution from coherent backscatter radars, these instruments cannot measure conductivity. Since the equation for computing field-aligned currents explicitly requires the gradient in conductance to be known, the use of statistically averaged models is excluded for case studies. If a dense enough array of magnetometers is available, these data may be used in combination with radar data to produce a measured conductance distribution within the overlapping fields of view. This has been done for data obtained in northern Scandinavia. Comparing field-aligned currents, computed with and without knowing the ionospheric conductance distribution, shows that gradients in conductance can not be ignored, even for quiet geomagnetic conditions.