Performance of GPS-based accelerometry: A simulation experiment Original Research Article

Recent studies have shown that with the availability of high-quality CHAMP and GRACE gravity field models, it is feasible to determine accurate non-gravitational accelerations for low Earth orbiting satellites indirectly from precise GPS satellite-to-satellite observations. Possible applications of this so-called GPS-based accelerometry approach consist of accelerometer calibration and atmospheric density and wind computations. With the growing number of high-quality space-borne GPS receivers, this method could be applied to a large range of satellites. In this paper an extensive simulation study has been carried out, based on real accelerometer data from the GRACE mission, in order to determine the optimal processing strategy and the resulting accuracy of the estimated non-gravitational accelerations. It is shown that the optimal processing strategy consists of a piecewise linear parameterization of the estimated empirical accelerations, together with short 6-h orbit arcs. The GPS-based accelerometry approach makes use of triple-differenced GPS observations and the impact of considering the correlated observation noise was found to be marginal in the presence of other error sources such as GPS ephemeris errors. Using a priori non-gravitational force models improves the recovery of low temporal resolution accelerations, except during huge geomagnetic storms. With this strategy, non-gravitational accelerations can be recovered during high solar activity with an accuracy of better than 10% of the total signal in along-track direction and around 25–40% in cross-track direction, at time resolutions of around 8–20 min. During solar minimum conditions, the relative recovery error will increase to approximately 50% in along-track direction and around 60–70% in cross-track direction, due to the reduced atmospheric drag signal. Unfortunately, GPS-based accelerometry is hardly sensitive in the radial direction.