High-temperature mechanical spectroscopy of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) with different amounts of intergranular phase Original Research Article

Y-TZP ceramics of different grain sizes and with various content of amorphous intergranular phase have been studied by mechanical spectroscopy and transmission electron microscopy. In all grades both clean grain boundaries and grain boundaries wetted by an amorphous film are present. In the materials with higher amount of intergranular phase, large amorphous pockets are present. A thermally activated mechanical-loss peak is observed in all grades at 1600 K (0.1 Hz; ΔHact=560±20 kJ/mol). This peak evolves into a background at low frequencies and high temperature. The peak position and height depend on the grain size; the background is grain-size independent. The peak is interpreted as the limited sliding of those grains that are separated by an amorphous film. The background is attributed to the beginning of microcreep. In the grades with amorphous pockets an additional peak, interpreted as the α-relaxation of these pockets, is observed at 1425 K (0.1 Hz; ΔHact=570±20 kJ/mol).