EBSD studies of the stress-induced B2–B19′ martensitic transformation in NiTi tubes under uniaxial tension and compression Original Research Article

In situ electron backscattering diffraction (EBSD) investigations were conducted on polycrystalline NiTi tube specimens during tensile and compressive deformation. The long-range cooperative and catalytic martensitic transformation under tension induces the transformation to proceed in the form of helical Lüders band. Propagation of the band is closely related to the spatial distribution of the orientations of individual grains. In uniaxial compression, the larger variation in Schmid factors, and consequently the larger variation in the critical transformation stresses among grains, leads to a homogeneous martensitic transformation, and therefore the absence of the Lüders band. To interpret the observed tension–compression asymmetry, a crystallographic model of the critical transformation stress and transformation strain for polycrystalline NiTi under tension and compression is proposed. The model defines three crystallographic regions: tension-favorable, compression-favorable and neutral zones. The orientation population in which tensile strains are larger than compressive strains is much higher than that of orientations with higher compressive strains. For resolved shear stress, orientation populations favoring tension and compression do not show any great difference.