Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy: Transmission electron microscopy evidence for the formation of AlN during liquid phase sintering Original Research Article

A comprehensive transmission electron microscopy study has been made of the secondary phases and their interfaces with the matrix in an alloy of Al–2Mg–2Si–0.25Cu sintered in nitrogen. AlN was detected both at the Al–Mg2Si interface and inside Mg2Si grains as strings of nanocrystallites. Mg2Si did not exist at the sintering temperature; it was the solidified residue of the sintering liquid. The observation confirms the formation of AlN during liquid phase sintering of aluminium alloys in nitrogen. The likely pore filling processes are discussed in the light of the distribution of the AlN nanocrystallites. Two Al-, Si- and O-rich secondary phases were also identified, suggesting that, in addition to Mg, Si may have also played a role in disrupting the Al2O3 film that enveloped each Al powder particle. These findings improve the fundamental basis for understanding the sintering of aluminium alloys in nitrogen and the role of Si.