Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling Original Research Article

A series of cyclic partial phase transformation experiments has been performed to investigate the growth kinetics of the austenite to ferrite phase transformation, and vice versa, in Fe–Mn–C alloys. Unlike the usual phase transformation experiments (100% parent phase → 100% new phase), in the case of cyclic partial transformations two special stages are observed: a stagnant stage in which the degree of transformation does not vary while the temperature changes, and an inverse phase transformation stage, during which the phase transformation proceeds in a direction contradictory to the temperature change. The experimental results have been analyzed using paraequilibrium and local equilibrium diffusional growth models. Only the local equilibrium model was shown to predict the new features of the cyclic phase transformation kinetics. The stagnant stage was found to be due to Mn partitioning, while the inverse phase transformation is caused by non-equilibrium conditions when switching from cooling to heating and vice versa.