Three-dimensional phase-field simulation of micropore formation during solidification: Morphological analysis and pinching effect Original Research Article

A three-dimensional (3-D) multiphase-field model has been developed in order to study the formation of a micropore constrained to grow in a solid network (i.e. pinching effect). The model accounts for the pressure difference due to capillarity between liquid and gas, the equilibrium condition at triple (solid–liquid–pore) lines, and the partitioning and diffusion of dissolved gases such as hydrogen. From the predicted 3-D morphology of the pore, entities such as the interfacial shape distribution are plotted and analyzed. It is shown that the mean curvature of the pore–liquid surface, and thus also the pressure inside the pore, is uniform. The results are then compared with analytical pinching models. While predicting a similar trend, analytical models tend to underestimate the pore curvature at high solid fractions. Despite the complex morphology of pores reconstructed using high-resolution X-ray tomography, the present phase-field results suggest that a simple pinching model based on a spherical tip growing in between remaining liquid channels is a fairly good approximation.