Coherency loss of Al3(Sc,Zr) precipitates by deformation of an Al–Zn–Mg alloy Original Research Article

Al alloys with additions of Sc and/or Zr exhibit a reasonably stable grain structure due to a uniform distribution of coherent Al3(Sc,Zr) precipitates that forms at temperatures >300 °C. These precipitates are stable up to the solution treatment temperature and are able to pin subgrain and grain boundaries, inhibiting grain coarsening. The crystallographic structure of these precipitates presents a L12 superstructure coherent with the face-centred cubic Al matrix. Changes in the orientation relation between precipitates and the matrix are described in deformed, recovered and partially recrystallized samples of extrusions of AW7010 (AlZn6Mg2Cu2). The coherency of the intracrystalline Al3(Sc,Zr) precipitates present in the extrusions is lost by severe deformation performed by an equal channel angular pressing process, which produced a fine-grained microstructure. The deformed sample recovers, forming a subgrain structure with restored coherency of the Al3(Sc,Zr) precipitates. Rapid heating to 470 °C causes partial secondary recrystallization, which transforms the precipitates within the recrystallized grains into incoherent groups of particles that maintain their original orientation with each other.