Synthesis of dimethyl ether (DME) from methanol over solid-acid catalysts Original Research Article

The catalytic conversion of methanol to dimethyl ether (DME) has been studied over a series of solid-acid catalysts, such as γ-Al2O3, H-ZSM-5, amorphous silica-alumina, as well as titania modified zirconia. All the catalysts are active and selective for DME formation. The apparent activation energy for DME formation over γ-Al2O3 is ca. 25 kcal/mol, a value that increases to ca. 37 kcal/mol upon the addition of 23 Torr of H2O to the reagent. The rate of methanol dehydration decreases with increasing acidity (silica content) over the amorphous silica-alumina catalysts. Although H-ZSM-5 with Si/Al = 25 is the most active among the catalysts tested, the DME selectivity is only 20% at 280°C, a typical temperature used in the syngas-to-methanol process. An amorphous silica-alumina catalyst with 20 wt.-% silica content (SIRAL20) exhibits the best catalytic performance of those tested at 280°C.