Title of article :
Preparation of sulfated zirconia catalysts with improved control of sulfur content II. Effect of sulfur content on physical properties and catalytic activity Original Research Article
Author/Authors :
Dan Fa?rcas¸iu، نويسنده , , Jing Qi Li، نويسنده , , Stephen Cameron، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 1997
Pages :
12
From page :
173
To page :
184
Abstract :
The sulfur content of sulfated zirconia can be varied by changing the quantity of sulfuric acid used for impregnation in the controlled impregnation method, in which a pre-set quantity of sulfuric acid is added and evaporated without filtration or decanting. The material is then dried and calcined (in this work, for 5 h at 610°C). The sulfur content of the calcined material increases with the increase in the quantity of sulfuric acid, but the ratio of sulfate retained after calcination to sulfate impregnated decreases at first and then increases. The surface area gradually increases with the quantity of the acid up to 3 ml of acid per gram of zirconium hydroxide (2.5% S in SZ after calcination), then decreases abruptly. The crystal structure of the sulfated zirconia is also affected by the sulfur content. XRD data show that the sulfated zirconia with a low or medium sulfur content crystallizes only in the tetragonal form, whereas at higher sulfur content a minor fraction of monoclinic zirconia begins to be seen, in addition to the major tetragonal form. XPS data indicate that at the higher sulfate loading part of the sulfate is present in the bulk phase, rather than on the surface. Thus, the increase in sulfur uptake, decrease in surface area and change in crystallinity appear related to sulfate migration inside the particles. The catalytic activity for the isomerization of methylcyclopentane at 65°C shows a maximum for a sulfur content around 3%. It appears that the optimum catalyst should contain the maximum amount of sulfate near the surface, but not necessarily on the surface, and crystallize in the tetragonal form.
Keywords :
Sulfate loading , effect on properties of sulfated zirconia , Sulfate loading , Sulfated zirconia , Preparation , Bi-functional catalyst , Sulfate loading , Properties , effect on catalytic activity of sulfated zirconia
Journal title :
Applied Catalysis A:General
Serial Year :
1997
Journal title :
Applied Catalysis A:General
Record number :
1148865
Link To Document :
بازگشت