Title of article :
Estimating the fatigue stress concentration factor of machined surfaces
Author/Authors :
D. Arola، نويسنده , , C.L. Williams، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2002
Pages :
8
From page :
923
To page :
930
Abstract :
In this study the effects of surface texture on the fatigue life of a high-strength low-alloy steel were evaluated in terms of the apparent fatigue stress concentration. An abrasive waterjet was used to machine uniaxial dogbone fatigue specimens with specific surface quality from a rolled sheet of AISI 4130 CR steel. The surface texture resulting from machining was characterized using contact profilometry and the surface roughness parameters were used in estimating effective stress concentration factors using the Neuber rule and Arola–Ramulu model. The steel specimens were subjected to tension–tension axial fatigue to failure and changes in the fatigue strength resulting from the surface texture were assessed throughout the stress–life regime (103≤Nf≤106 cycles). It was found that the fatigue life of AISI 4130 is surface-texture-dependent and that the fatigue strength decreased with an increase in surface roughness. The fatigue stress concentration factor (Kf) of the machined surfaces determined from experiments was found to range from 1.01 to 1.08. Predictions for the effective fatigue stress concentration (K̄f) using the Arola–Ramulu model were within 2% of the apparent fatigue stress concentration factors estimated from experimental results.
Keywords :
Surface roughness , Stress concentration , Fatigue
Journal title :
INTERNATIONAL JOURNAL OF FATIGUE
Serial Year :
2002
Journal title :
INTERNATIONAL JOURNAL OF FATIGUE
Record number :
1160787
Link To Document :
بازگشت