Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr–1Mo ferritic steel

Low cycle fatigue (LCF) behaviour of a modified 9Cr–1Mo steel under normalized and tempered conditions is reported. The alloy was normalized at 1313K for 1 h followed by tempering at 1033K for 1 h, which resulted in a tempered martensitic structure. Total axial strain controlled LCF tests were conducted at a constant strain rate of 3×10−3 s−1 at different strain amplitudes varying from ±0.25 to ±1.0% in the temperature range of 300–873K. The cyclic stress response behaviour, in general, showed an initial brief hardening for the first few cycles, followed by a continuous and gradual softening regime that ended in a stress plateau that continued up to the specimen failure. The fatigue life decreased as the temperature increased. The temperature effect on life was more pronounced at low strain amplitudes. The metallography of the failed samples revealed that the fatigue failure at high amplitudes of testing was marked by extensive crack branching and the formation of secondary cracks. Oxidation was found to exert major influence on LCF life reduction at 873K.