Title of article
Effects of modifiers on the profile of lycopene extracted from tomato skins by supercritical CO2 Original Research Article
Author/Authors
John Shi، نويسنده , , Chun Yi، نويسنده , , Sophia Jun Xue، نويسنده , , Yueming Jiang، نويسنده , , Ying Ma، نويسنده , , Dong Li، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2009
Pages
6
From page
431
To page
436
Abstract
The effects of the addition of non-toxic modifiers (ethanol, water, and canola oil) in supercritical carbon dioxide (SC-CO2) extractions from tomato skins were investigated. The extraction efficiency was improved by the addition of any of the three modifiers. Various temperatures (45 °C, 60 °C, and 75 °C) and pressures (25, 30, and 35 MPa) for the modified extraction processes were also compared. The highest yield was achieved at the highest temperature (75 °C) and highest pressure (35 MPa). For the three single modifiers, yields increased with increasing amounts (from 5% to 10%) of the modifiers. The highest lycopene yields were obtained with 15% olive oil at 45 °C and 10% olive oil at 75 °C. For mixtures of binary and ternary modifiers, the mixture of ethanol (10%) and olive oil (10%) achieved the highest extraction efficiency (36.6% at 45 °C, and 56.8% at 75 °C). It might be caused by the combined synergetic influences of enhanced adsorption on the polar sites of the matrix by ethanol and the increased solubility of lycopene by olive oil. Cluster analysis was applied to build the relationship between the lycopene yields and co-solvent effects. The addition of olive oil also slightly increased the proportion of cis-isomers in the lycopene extract.
Keywords
Lycopene , Tomato , Supercritical fluid extraction , Ethanol , Water , Oil , Modifiers
Journal title
Journal of Food Engineering
Serial Year
2009
Journal title
Journal of Food Engineering
Record number
1168307
Link To Document