Development and characterization of a nanomultilayer coating of pectin and chitosan – Evaluation of its gas barrier properties and application on ‘Tommy Atkins’ mangoes Original Research Article

A nanomultilayer coating made of food-grade, bio-based materials (consisting of five nanolayers of pectin and chitosan) was produced. This coating was firstly characterized in terms of the water vapor, oxygen and carbon dioxide permeabilities; these parameters exhibited values of 0.019 ± 0.005 × 10−11, 0.069 ± 0.066 × 10−14 and 44.8 ± 32 × 10−14 g m/(Pa s m2), respectively, and are of the same order of magnitude of those found in other nanomultilayer systems. The nanomultilayer system was applied on whole ‘Tommy Atkins’ mangoes and the layers’ adsorption was confirmed by changes in the contact angle of the coated fruits’ skin. After 45 d of storage, uncoated mangoes presented a higher mass loss, higher total soluble solids and lower titratable acidity in comparison with coated mangoes. Uncoated mangoes had also a damaged and wrinkled appearance, showing evidence of microbial spoilage, and the flesh exhibited a slightly brownish color, in comparison with the coated mangoes. These results suggest a positive effect of the coating on gas flow reduction and on the consequent extension of the shelf-life of mangoes.