An anisotropic model for frequency analysis of arterial walls with the wave propagation approach

An anisotropic model for calculating natural frequency of arterial walls is proposed in this paper. The first-order shear deformation theory (FSDT) is used for the arterial walls, and the wave propagation approach is applied that can easily handle the boundary conditions. Results obtained using this model have been evaluated against those available in the literature and the agreement has been found to be good. Experiments were carried out on a natural rubber latex tube. The relative differences of the first four natural frequencies between the experiment and the theory are less than 7%. The variation of the natural frequency of this tube with the longitudinal and circumferential modes m and n is studied which suggests the first four natural frequencies are with n = 1 and m = 1–4. Simulations show that classical Donnell’s, Love’s and beam theories are not suitable for this thick tube while FSDT results closely agree with the experiment. The anisotropy of circumferential elastic modulus on natural frequencies of the tube is analyzed.