Prediction of birefringence distribution for optical glass lens

Based on the viscoelastic theory, simulations were carried out on glass-lens forming processes. In addition, the birefringence distribution was calculated by stress-optic relation. First, to verify this viscoelastic simulation, FEM analysis was performed with the same material properties and process conditions used in the Brucknerʹs experiment. The result of the analysis was compared with Nadaiʹs and Brucknerʹs results. The simulation results were in good agreement with the deformation and birefringence distribution in the experimental results. Finally, the FEM simulation technique was applied to actual LD-lens. The simulation was performed for each different cooling rate and the results were compared to each other in terms of birefringence. To investigate the effect of initial preform shape to optical property, a simulation was performed by using the new-proposed-shape-preform and the results were compared to the present shape in terms of birefringence.