Characterization of mechanically sheared edges of dual phase steels

In recent years advanced high strength steels (AHSS) received increased interest for light structures with improved performance, but they are often sensitive to edge cracking during sheet metal forming. In this study mechanically sheared edges were characterized for three dual phase steels (DP600, DP780 and DP980), sheared with three die clearances (5%t, 10%t, 15%t) and along rolling and transverse directions. Microstructures of the materials were provided first, and then the sheared edges were examined by optical microscopy and scanning electron microscopy that reveal the morphology and random feature of the sheared edges. A factorial analysis was performed to reveal the general trends of the processing parameters on four edge zones. A new strain measurement method was used for characterizing strain distribution in the sheared region, which shows the peak strain to be higher than 3. The strain quickly decreases from sheared edge to interior, leaving a shear-affected zone of about 500 μm or 31% of the thickness. The fracture processes and involved mechanisms were discussed.