Effect of vertical rolling at various temperatures on subsequent multi-pass severe rolling of AZ31B alloy sheet

AZ31B alloy was subjected to vertical rolling at various temperatures prior to multi-pass severe rolling processing including initial rolling including one 80% reduction pass and finish rolling at 300 °C and 350 °C, respectively. The depth and number of edge crack, microstructure evolution and tensile properties were examined. The results indicate that pre-vertical rolling at low temperature before severe rolling can significantly restrain edge crack, change relative frequency distribution of edge-crack depth, increase microstructure homogeneity and sharply change the intensity and distribution of basal texture of initial-rolled sheets. The level of edge crack increases with increased vertical rolling temperature above 100 °C mostly due to the combination of shear band density, microstructure homogeneity, grain size and texture of rolled sheets. Compared with conventional rolling, the effect of vertical rolling on final mechanical properties depends on the finish rolling temperature due to the combination of shear bands, twins and grain size. The variation trend of mechanical properties with increased vertical rolling temperature is also sensitive to finish rolling temperature. For as-rolled sheets, the severe rolling route with vertical rolling at 100 °C and finish rolling at 300 °C should be required.