Thermomechanical study of low-density polyethylene, polyamide 6 and its blends

By using thermomechanical analysis (TMA) multiple relaxation transitions in the amorphous part of semi-crystalline polymers and their blends can be found. These result from differences in the interaction energies between segments of macromolecules, and as a result, in molecular mobility. TMA shows essential changes in the structure of low-density polyethylene (LDPE) resulting from the grafting of a maleic anhydride (LDPE-g-MAH) onto this semi-crystalline polymer. The grafting process did not suppress the ability of polyethylene to crystallize. Essential changes were found in molecular weight distribution and relaxation transitions of the ternary blends LDPE/PA6 (polyamide 6, PA6)/LDPE-g-MAH studied. For a concentration of PA6 up to 30 wt.%, a single relaxation transition is visible, which testifies that the components are miscible in the amorphous region. For blends with 40 and 50 wt.% of PA6, this structure was transformed and two relaxation transitions are visible. From the results obtained in this study it is concluded that the introduction 5 wt.% of grafted polyethylene is sufficient to produce a PA6/LDPE blend only for PA6 concentration up to 30 wt.% which is homogenous on “molecular” level. The transformation of the structure of the ternary polymer blend was explained by the interaction of the components during the melt mixing and changes in the structure of its amorphous regions.