Selective hydrogenation of butadiene–styrene copolymers using a Ziegler–Natta type catalyst 2. Thermal properties

Three types of butadiene–styrene copolymers, diblock, triblock and random, were partially hydrogenated in their elastomeric units in order to determine the influence of hydrogenation extent on their thermal properties. The hydrogenation reactions were carried out using a Ziegler–Natta type catalyst and the extent of hydrogenation was evaluated by FTIR spectroscopic technique. The percentage of crystallinity was determined by differential scanning calorimetry (DSC), considering the low density polyethylene (LDPE) as reference since the saturation of elastomeric units with low content of 1,2-vinyl bonds gives a structure which resembles to LDPE, thus semi-crystalline polymers were obtained. On the other hand, the glass transition temperature (Tg) for the hydrogenated and non-hydrogenated copolymers as well as their heat of fusion, were also determined by DSC. An equation to evaluate the Tg of partially hydrogenated random copolymers is proposed considering both the saturated and unsaturated fractions. The thermo-oxidative behaviour of certain hydrogenated and non-hydrogenated copolymers was evaluated by thermogravimetric analyses (TGA). The results obtained by TGA suggest that a minimum saturation level is necessary in order to improve the thermo-oxidative resistance of the polymers.