Study on solvent permeation resistance properties of nylon6/clay nanocomposite

Nylon6/clay nanocomposite is prepared by mixing organized montmorillonite with nylon6 in HAAKE mixer. Solvent permeation resistance of the nanocomposite is measured to estimate the resistance to solvent permeation. The nanocomposite shows resistance to solvent permeation superior to that of pure nylon6. In addition, the clay content was found to significantly influence the solvent permeation resistance of nylon6, and the maximum improvement in barrier properties of nylon6/clay composite was found as the clay content reached an “optimum” value. By using proper composites and processing conditions, the permeation rate of toluene and ethanol in nylon6/clay nanocomposite is about 3 and 4 times slower than that in pure nylon6 at 50 °C. Our investigation indicated that the crystalline property of nylon6 has a strong impact on the sorption and diffusion of small molecules in the polymer. The improvement in solvent barrier properties of nylon6/clay nanocomposite is attributable to incorporation of an impermeable phase such as the layered silicate, improvement in crystallinity and decrease of crystalline dimension, which are evidenced by XRD, AFM, DSC and polarized optical microscopy (POM) studies.