Preparation of polypropylene/sepiolite nanocomposites using supercritical CO2 assisted mixing

Well dispersed polypropylene (PP)/sepiolite clay nanocomposites were prepared successfully using supercritical carbon dioxide (scCO2) assisted mixing with and without the presence of maleic anhydride grafted polypropylene (PP-g-MA) as compatibilizer. The resulting morphology and polymorphism of nanocomposites were established using X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) observations. The mechanical properties of the nanocomposites were investigated and compared with those obtained by a traditional melt compounding method. Our results showed that by using scCO2 in the process, we were able to obtain better sepiolite dispersions and reduce breakage of sepiolite fibres. Consequently, a significant improvement in the yield stress was observed for the nanocomposites processed in scCO2 compared to those processed by the traditional melt compounding. XRD data also indicated that the resulting nanocomposites had only α-phase crystallites of PP while the presence of sepiolite could also induce preferred orientation of these α-phase crystallites.