Effect of montmorillonite on structure and properties of nanocomposite with PA6/PS/elastomer matrix

Polyamide nanocomposites with fair balance of mechanical properties were recently obtained by addition of finely dispersed clay-compatibilized rubber or rigid PS phase. This work deals with combination of both components, which recently led also to enhanced mechanical behaviour in an analogous reactively compatibilized ternary system. Application of clay to PA6/PS/EPR matrix leads to a decrease in particle size analogously to corresponding binary blends, but the effect of clay on toughness is predominantly contradictory, i.e., a decrease with increasing clay content was found. Also the toughening effect of formed core–shell (elastomer/clay) particles is lower in comparison with binary PA6/EPR. At the same time, in contrast to the PA/PS system, the presence of core–shell particles formed by PS/C15 preblending leads to fair mechanical behaviour including enhanced toughness. This documents a complex affecting of the system behaviour by clay and the expected synergistic cooperation of numerous clay-induced changes in both component parameters and structure. The obtained results indicate that a proper combination of rigid and elastomeric inclusions can lead to nanocomposites with balanced and enhanced mechanical behaviour.