Title of article :
Syngas production from methane reforming with CO2/H2O and O2 over NiO–MgO solid solution catalyst in fluidized bed reactors
Author/Authors :
Keiichi Tomishige، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2004
Pages :
14
From page :
405
To page :
418
Abstract :
Catalyst performance of NiO–MgO solid solution catalysts for methane reforming with CO2 and H2O in the presence of oxygen using fluidized and fixed bed reactors under atmospheric and pressurized conditions was investigated. Especially, methane and CO2 conversion in the fluidized bed reactor in methane reforming with CO2 and O2 was higher than those in the fixed bed reactor over Ni0.15Mg0.85O catalyst under 1.0 MPa. In contrast, conversion levels in the fluidized and fixed bed reactor were almost the same over MgO-supported Ni and Pt catalysts. It is suggested that the promoting effect of catalyst fluidization on the activity is related to the catalyst reducibility. On a catalyst with suitable reducibility, the oxidized and deactivated catalyst can be reduced with the produced syngas and the reforming activity regenerates in the fluidized bed reactor during the catalyst fluidization. In addition, the catalyst fluidization inhibited the carbon deposition.
Keywords :
Synthesis gas , Fluidized bed reactor , Carbon deposition , NiO–MgO solid solution , Methane reforming
Journal title :
CATALYSIS TODAY
Serial Year :
2004
Journal title :
CATALYSIS TODAY
Record number :
1231963
Link To Document :
بازگشت