Computer Model of Phase Transformation From Hot-Deformed Austenite in Niobium Microalloyed Steels Original Research Article

Based on thermodynamics and kinetics, a new mathematical model was developed to calculate the CCT diagrams and the transformation kinetics in low carbon niobium steels, in which the effect of deformation on the degree of supercooling was taken into account. The undercooling caused by deformation is the major reason for the increase of the starting transition temperature during continuous cooling. The critical cooling rate of bainite formation is within 2–5 °C/s for the studied niobium steels and deformation is suitable for the occurrence of pearlite. The ferrite volume fraction increases with the increase of the austenite boundary area, and decreases with the increase of the cooling rate. The calculated CCT diagrams and the volume fraction of each phase are in good agreement with the measurements.