Effects of electrodeposited Co and Co–P catalysts on the hydrogen generation properties from hydrolysis of alkaline sodium borohydride solution

Co and Co–P catalysts electroplated on Cu in sulfate based solution without or with an addition of H2PO2− ions were developed for hydrogen generation from alkaline NaBH4 solution. The microstructures of the Co and Co–P catalysts and their hydrogen generation properties were analyzed as a function of cathodic current density and plating time during the electrodeposition. An amorphous Co–P electrodeposit with micro-cracks was formed by electroplating in the sulfate based solution containing H2PO2− ions. It was found that the amorphous Co–P catalyst formed at 0.01 A/cm2 exhibited 18 times higher catalytic activity for hydrolysis of NaBH4 than did the polycrystalline Co catalyst. The catalytic activity of the electrodeposited Co–P catalyst for hydrolysis of NaBH4 was found to be a function of both cathodic current density and plating time, that is, parameters determining the concentration of P in the Co–P catalyst. Especially, Co–13 at.% P catalyst electroplated on Cu in the Co–P bath at a cathodic current density of 0.01 A/cm2 for 1080 s showed the best hydrogen generation rate of 954 ml/min g-catalyst in 1 wt.% NaOH + 10 wt.% NaBH4 solution at 30 °C.