Numerical assessment for impact strength measurements in concrete materials

Measurement of dynamic strength of concrete at impact relevant strain rates and pressures is the purpose of the described study. Therefore, an experimental design of direct planar impact experiments with longitudinal and transverse strain gauges is analyzed in predictive hydrocode simulations using an elastic–plastic damage model for concrete. The calculations and first experimental results on mortar show decreasing phase velocities of stress waves both in longitudinal and lateral gauges. The model clearly associates it with the onset of damage, possibly interpreted as a failure wave. Numerical analysis is furthermore used to compare a monolithic target block to a thoroughly assembled concrete sample in order to include flat gauges in the material. The planned experimental procedure to derive wave speeds, particle velocities and strain rates from stress measurements is anticipated and validated on the basis of simulated gauge signals. The most important finding is the prediction and first experimental confirmation that concrete ultimate strength and damaged yield stress can be derived at strain rates in the order of 104/s from the proposed type of experiments. This technique promises new insight into the strength and failure processes of concrete in the challenging loading region around the characteristic minimum of the shock particle velocity relationship.