Ratchetting under tension–torsion loadings: experiments and modelling

This paper is concerned with the mechanical behaviour of 316 austenitic stainless steel under multiaxial loadings and particular attention is paid to ratchetting under tension–torsion non-proportional loadings. First, a series of uniaxial tests and biaxial tests has been carried out in order to calibrate five different cyclic plasticity models based on an isotropic hardening rule and a non-linear kinematic hardening rule. It is shown that this class of models gives quite good agreement between the experimental and numerical results. Second, another series of ratchetting tests has been carried out under tension–torsion loadings in order to test the prediction capacities of the previous models. It is shown that whereas the models have been calibrated with similar loading paths, four of the five selected models give poor predictions.