Multiscale dislocation dynamics simulations of shock compression in copper single crystal

Ultra short pulse shock wave propagation, plastic deformation and evolution of dislocations in copper single crystals with (0 0 1), (0 1 1) and (1 1 1) orientations are investigated using multiscale dislocation dynamics plasticity analyses. The effects of peak pressure, pulse duration, crystal anisotropy and the nonlinear elastic properties on the interaction between shock wave and dislocations are investigated. The results of our calculations show that the dislocation density has a power law dependence on pressure with a power of 1.70 and that the dislocation density is proportional to pulse duration and sensitive to crystal orientation. These results are in very good agreement with the analytical predications of Meyers et al. [Meyers, M.A., Gregori, F., Kad, B.K., Schneider, M.S., Kalantar, D.H., Remington, B.A., Ravichandran G., Boehly, T., Wark, J., 2003. Laser-induced shock compression of monocrystalline copper: characterization and analysis. Acta Materialia 51, 1211–1228] and the experimental results of Murr [Murr, L.E., 1981. Residual microstructure-mechanical property relationships in shock loaded metals and alloys. In: Meyers, M.A., Murr, L.E. (Eds.), Shock Waves and High Strain Rate Phenomena in Metals. Plenum, New York, pp. 607–673]. It is shown also that incorporating the effect of crystal anisotropy in the elastic properties results in orientation dependent wave speed and peak pressure. The relaxed configurations of dislocation microstructures show the formation of microbands coincident with the slip planes.