Improving the color purity and efficiency of blue organic light-emitting diodes (BOLED) by adding hole-blocking layer

This work demonstrates the fabrication of a bright blue organic light-emitting diode (BOLED) with good color purity using 4,4′-bis(2,2-diphenylvinyl)-1,1′-biphenyl (DPVBi) and bathocuproine (BCP) as the emitting layer (EML) and the hole-blocking layer (HBL), respectively. Devices were prepared by vacuum deposition on indium tin oxide (ITO)-glass substrates. The thickness of DPVBi used in the OLED has an important effect on color and efficiency. The blue luminescence is maximal at 7670 cd/m2 when 13 V is applied and the BCP thickness is 2 nm. The CIE coordinate at a luminance of 7670 cd/m2 is (0.165, 0.173). Furthermore, the current efficiency is maximum at 4.25 cd/A when 9 V is applied.