Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)

Ni-YSZ cermet anode supports solid oxide fuel cells (SOFCs) were fabricated by high-frequency induction heated sintering (HFIHS) under 60 MPa pressure with powders synthesized by the glycine nitrate process (GNP) as well as mechanically mixed commercial powders. The HFIHS method created a uniformly porous microstructure without abnormal grain growth compared to the conventional sintering method. Samples sintered by HFIHS show higher strength and electrical conductivity than conventionally sintered samples, even though they have similar porosity.