Effect of physical vapor deposited Al2O3 film on TGO growth in YSZ/CoNiCrAlY coatings

Thermal barrier coatings (TBCs) comprising of yttria stabilized zirconia (YSZ) ceramic top coat and CoNiCrAlY metallic bond coat have been widely used in gas turbines. However, the developed oxides layer in the interface of the top and bond coats during thermal exposure of the TBCs always results in the destruction of the system. In order to restrain the growth of oxides layer and improve the thermal shock resistance of TBCs, a thin Al2O3 film was pre-deposited on CoNiCrAlY bond coat by physical vapor deposition (PVD) technology. After thermal exposure, morphologies and phase compositions of the thermal growth oxides (TGO) layer in the conventional and pre-deposited Al2O3 film TBCs were examined by scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). The residual stresses in the coatings were analyzed using micro-Raman spectroscopy (LabRam-1B). It was found that TGO layer formed in the conventional TBCs was mainly composed of Al2O3, (Cr,Al)2O3 + (Co,Ni)(Cr,Al)2O4 + NiO (CSN), and (Cr,Al)2O3 + (Co,Ni)(Cr,Al)2O4 (CS), while in the treated TBCs, the formed TGO layer appeared more uniform and compact. The CSN and CS clusters, which are normally considered as a weakness for TBCs, were greatly limited. The residual stresses in the TBCs after thermal shock were also reduced by the deposition of Al2O3 film.