Properties of controlled low-strength materials incorporating cement kiln dust and slag

This research evaluated the potential use of cement kiln dust (CKD) together with slag to replace the use of cement in the production of controlled low-strength material (CLSM). The low strength requirements of CLSM compared to conventional concrete enable the use of industrial by-products for the production of CLSM. In this study, the workability-related fresh properties of CLSM mixtures were observed through slump flow diameter, V-funnel flow time and filling capacity. Setting times, temperature rise, air content and unit weight of CLSM mixtures were also determined as part of fresh properties. The hardened properties that were monitored for 28 days included the unconfined compressive strength. The test results presented herein show that a combination of less than 50 kg/m3 slag and up to 300 kg/m3 CKD provides a good mix that satisfies the requirements of a CLSM with similar or better properties to that of CKD-based CLSM mix containing Portland cement. Suitable CLSM mixtures with reasonable fresh and hardened properties could also be developed by using CKD alone. However, reduced strength in such CLSM mixtures may limit their field application. The slag significantly assisted in increasing compressive strength of CKD-based CLSM mixtures. A CLSM mix containing a combination of slag and CKD was shown to have excellent characteristics for flowable backfill and excavatable base material. Therefore, producing CKD/slag based CLSM through the use of co-generated products from the cement and iron manufacturing processes can provide leadership for the construction industry in the transition for sustainable development.