Effects of preheating on diaspore: Modifications in colour centres, structure and light emission Original Research Article

The thermal properties and thermal stability of diaspore-corundum (AlOOH–Al2O3), from Goian (Pontevedra, Spain) were studied by means of differential thermal analysis (DTA), thermogravimetry (TG), high temperature X-ray diffraction (HTXRD) and thermally stimulated luminescence (TL) techniques. The samples were annealed to link the combined effect of (i) dehydroxylation, (ii) oxidation–reduction of chromophores (Mn 0.5%, Fe2O3 0.12%, TiO2 0.021% and Cr 80 ppm) determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and (iii) phase transitions whilst sample heating (i.e. α-AlOOH→α′-Al2P3→α-Al2O3). The blue colour of diaspore, attributed to the Ti4+–Fe2+ intervalence-charge-transfer mechanism, turns to white (circa 500 °C) in good agreement with the DTA endothermic peak (dehydroxylation). The coexistence of α-AlOOH and α′-Al2P3 phases has been detected by in situ HTXRD and could be correlated to the thermoluminescence tests performed on preheated aliquots (up to 500 °C).