Macroscale and microscale evolutions of mechanically alloyed Fesingle bondZn systems Original Research Article

The present work aims to correlate, in time, macroscale and microscale phenomenological evolutions of the microstructure of Fe and Fesingle bondZn alloys processed by mechanical milling (MM) and alloying (MA), respectively. Powders were characterized for particle size distribution (PSD), particle morphology (optical microscopy, OM, scanning electron microscopy, SEM), microhardness, crystallite size, differential scanning calometry (DSC) and transmission electron microscopy (TEM). Two macroscopic regimes of PSD behavior were distinguished: the first one dominated by the cold welding process; and, the other where both fracture and agglomeration play a significant role. Solid solubilization of Zn on bcc Fe was found to reduce the final microhardness as well as increase the lattice parameter and is very well predicted by Miedemaʹs thermodynamical approach. Microhardness and solid solution formation kinetics were correlated in time and both could be precisely described by a logistic function. After 5 h of planetary milling, microhardness and the lattice parameter become stable as well as the PSD and particle morphology, indicating that the system has already reached steady state. Indeed, this condition can be monitored by both macroscopic and microscopic parameters. Prior to an homogeneous powder, DSC results suggest an endothermic solid-state amorphization reaction for samples processed for up to 1 h as a result of the formation of clean Fe/Zn interfaces during MA.