Author/Authors :
Lijun Zhao، نويسنده , , Xiqiang Huang، نويسنده , , Ruibin Zhu، نويسنده , , Zhe Lu، نويسنده , , Weiwei Sun، نويسنده , , Yaohui Zhang، نويسنده , , Xiaodong Ge، نويسنده , , Zhiguo Liu، نويسنده , , Wenhui Su، نويسنده ,
Abstract :
Sm-doped Ceria (SDC) electrolyte film was successfully fabricated on anode substrate of NiO-SDC by screen-printing. Some technical parameters for fabrication were investigated and optimized, including printing times, ink composition and sintering temperature. Scanning electron microscope (SEM) measurement was done to check the microstructures of SDC film and single cell. The parameters greatly affected the quality of SDC film and cell performance. The single cell with the optimum parameters exhibited an OCV of 0.82 V and a power density of 0.5 W/cm2 at 600 °C.
