Testing of propane/isobutane mixture in domestic refrigerators

The performance of a propane/isobutane (R290/R600a) mixture was examined for domestic refrigerators. A thermodynamic cycle analysis indicated that the propane/isobutane mixture in the composition range of 0.2 to 0.6 mass fraction of propane yields an increase in the coefficient of performance (COP) of up to 2.3% as compared to CFC12. For the actual tests, two commercial refrigerators of 299 and 465 l were used. For both units, all refrigeration components remained the same throughout the tests, except that the length of the capillary tube and amount of charge were changed for the mixture. Each refrigerator was fully instrumented with more than 20 thermocouples, two pressure transducers, and a digital watt/watt-h meter. For each unit, both ‘energy consumption test’ and ‘no load pull-down test’ were conducted under the same condition. The experimental results obtained with the same compressor indicated that the propane/isobutane mixture at 0.6 mass fraction of propane has a 3–4% higher energy efficiency and a somewhat faster cooling rate than CFC12. The mixture showed a shorter compressor on-time and lower compressor dome temperatures than CFC12. In conclusion, the proposed hydrocarbon mixture seems to be an appropriate long term candidate to replace CFC12/HFC134a from the viewpoint of energy conservation requiring minimal changes in the existing refrigerators.