Elastic analysis of hybrid bonded joints and bonded composite repairs

The authors extend the closed-form bonded joint linear elastic analysis method of Delale et al. [Delale F, Erdogan F, Aydinoglu MN. Stresses in adhesively bonded joints: a closed-form solution. J Compos Mater 1981;15:249–71] and Bigwood and Crocrombie [Bigwood DA, Crocombe AD. Elastic analysis and engineering design formulae for bonded joints. Int J Adhes Adhes 1989;9(4):229–42] to include the composite deformation mechanisms and the thermal residual strains that arise in hybrid metal-composite joints such as those presented by bonded composite repairs applied to metallic aircraft structures. The analytical predictions for the adhesive stresses and the compliance are compared to the results of a linear elastic finite element model that has itself been validated by comparison with experimental results. The results are applied to the problem of coupled linear extension and bending of a bonded composite repair applied to a cracked aluminum substrate. The resulting stress intensity factor and crack-opening displacement in the repaired plate are compared to the results of a three-dimensional finite element analysis, and also exhibit excellent results. Throughout the text, observations are made regarding the practical application of the results to failure prediction in hybrid joints, whereby the authors demonstrate the need for consistency in the analytical methods used to determine the fatigue and failure of composites from the coupon level to the analysis of the final structural details.