Bending of cross-ply laminated composites: An accurate and efficient plate theory based upon models of Lekhnitskii and Ren

Bending laminated composites results in a distinctive zig-zag shaped deformation pattern, accordingly jumping transverse shear strains at layer interfaces, but continuous courses of transverse shear stresses there. An accurate representation of this laminate-specific mechanical behavior in terms of plate theories is challenging, even more if computational efficiency is aimed for. Here, an axiomatic equivalent single layer plate theory for cross-ply laminated composites is presented, which is based on the work of Lekhnitskii and Ren and delivers accurate deformation and stress prognoses at the cost of six solution variables. Fulfilling transverse stress continuity, the infinitesimal equilibrium equations are considered in order to derive an appropriate ansatz for the transverse shear stresses including the influence of all plane stress reduced stiffness components. However, the effect of the normal stress σzz is neglected, and deflection w is assumed constant across the plate thickness. The equilibrium equations and corresponding boundary conditions of the plate theory are derived by application of the principle of virtual displacements. Numerical results for symmetrical and non-symmetrical composites as well as for typical sandwich plates obtained by the present theory show good agreement with corresponding exact elasticity solutions given by Pagano, even for thick plates.