Self-assembled polyelectrolyte multilayer membranes with highly improved pervaporation separation of ethanol/water mixtures

Ethanol/water pervaporation through ultrathin polyelectrolyte multilayer membranes is described. The membranes were prepared by the layer-by-layer technique, i.e. by alternating sequential adsorption of cationic and anionic polyelectrolytes on a porous support. The separation capability was optimized by variation of the chemical structure of the polyelectrolytes, by variation of pH and ionic strength of the polyelectrolyte solutions used for membrane preparation and by annealing of the polyelectrolyte membranes. It was found that the separation is mainly affected by the charge density of the polyelectrolytes which is controlled by the chemical structure and the degree of ionisation of the polar groups. Selectivity for water was highest, if polyelectrolytes of high charge density such as polyethyleneimine (PEI), polyvinylamine (PVA) and polyvinylsulfate (PVS) were used and if the pH of the polyelectrolyte solutions was equal to the mean of the pKa values of the corresponding cationic and anionic polyelectrolyte. Best results were obtained for PVA/PVS and PEI/PVS membranes which are characterized in detail with regard to their separation behavior.