Novel cellulose acetate membrane blended with phospholipid polymer for hemocompatible filtration system

To improve the blood compatibility of cellulose acetate (CA) membranes for hemofiltration, a novel CA membrane blended with 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer was designed for a hemocompatible filtration system. The MPC copolymer (PMB30) was synthesized from MPC and n-butyl methacrylate. The polymer solution for making the membrane was prepared from a solvent mixture composed of N,N-dimethylformamide, acetone, and 2-propanol. The CA and CA/PMB30 blended membranes with an asymmetric and porous structure were prepared by a phase inversion process. The mechanical properties and solute permeability of the CA/PMB30 blended membrane could be controlled by preparation conditions such as the composition of the solvents and the solvent evaporation time. The CA/PMB30 blended membrane showed both good water and solute permeabilities in comparison with the CA membrane. Also, the molecular weight of the solute passed through the membrane was changed by the addition of PMB30, and good permselectivity could be obtained. Moreover, the CA/PMB30 blended membranes had excellent blood compatibility such as protein adsorption resistivity compared to the CA membrane due to location of the MPC units in the PMB30 at the surface.