Oxygen production using La0.6Sr0.4Co0.2Fe0.8O3−α (LSCF) perovskite hollow fibre membrane modules

A phase-inversion/sintering technique has been employed in the production of La0.6Sr0.4Co0.2Fe0.8O3−α (LSCF) hollow fibre membranes, a bundle of which has then been placed in a high-temperature furnace for production of high purity oxygen from air at temperatures between 980 °C and 1060 °C. By applying a vacuum in the hollow fibre lumens, a product stream containing oxygen purity of 97.15% has been obtained. The downstream vacuum degree higher than 99 kPa shows negligible effect on the oxygen production rate. Studies on long-term operation suggest that the LSCF hollow fibre membranes are less stable for the oxygen production due to the segregation of the constituent membrane elements and the formation of new phases on the outer membrane surfaces. The effect of the operating cycle on the retrogression of membrane performance is much larger than that of duration used in a single cycle.