Author/Authors :
Furuno، نويسنده , , T. and Kurishita، نويسنده , , H. and Nagasaka، نويسنده , , T. and Nishimura، نويسنده , , A. and Muroga، نويسنده , , T. and Sakamoto، نويسنده , , T. and Kobayashi، نويسنده , , S. and Nakai، نويسنده , , K. and Matsuo، نويسنده , , S. and Arakawa، نويسنده , , H.، نويسنده ,
Abstract :
Creep resistance is the major concern of vanadium and its alloys for fusion reactor structural applications. In order to elucidate the effects of grain size on the creep behavior of solution and dispersion strengthened vanadium alloys, V–1.6Y–8W–0.8TiC specimens with fine grain sizes from 0.58 to 1.45 μm were prepared by mechanical alloying and HIP without any plastic working and tested at 1073 K and 250 MPa in vacuum. It is shown that the creep resistance of V–1.6Y–8W–0.8TiC depends strongly on grain size and increases with increasing grain size: The creep life for the grain size of 1.45 μm is almost one order longer than that of 0.58 μm, and about two orders longer than that of V–4Cr–4Ti (NIFS-Heat 2) although the grain size of V–4Cr–4Ti is as large as 17.8 μm. The observed creep behavior is discussed in terms of grain size effects on dislocation glide and grain boundary sliding.
