Title of article
The IFMIF-EVEDA accelerator beam dump design
Author/Authors
Iglesias، نويسنده , , D. and Arranz، نويسنده , , F. and Arroyo، نويسنده , , J.M. and Barrera، نويسنده , , G. and Braٌas، نويسنده , , B. and Casal، نويسنده , , N. and Garcيa Lَpez، نويسنده , , M. and Lَpez، نويسنده , , D. and Martيnez-Galvلn، نويسنده , , J.I. and Mayoral، نويسنده , , A. and Ogando، نويسنده , , F. and Parro، نويسنده , , M. and Oliver، نويسنده , , C. and Rapisarda، نويسنده , , D. E. Sanz، نويسنده , , J. and Sauvan، نويسنده , , P. and Ibarra، نويسنده , , A.، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2011
Pages
5
From page
1275
To page
1279
Abstract
The IFMIF-EVEDA accelerator will be a 9 MeV, 125 mA cw deuteron accelerator prototype for verifying the validity of the 40 MeV accelerator design for IFMIF. A beam dump designed for maximum power of 1.12 MW will be used to stop the beam at the accelerator exit. The conceptual design for the IFMIF-EVEDA accelerator beam dump is based on a conical beam stop made of OFE copper. The cooling system uses an axial high velocity flow of water pressurized up to 3.4 × 105 Pa to avoid boiling. The design has been shown to be compliant with ASME mechanical design rules under nominal full power conditions. A sensitivity analysis has been performed to take into account the possible margin on the beam properties at the beam dump entrance. This analysis together with the study of the maintenance issues and the mounting and dismounting operations has led to the complete design definition.
Journal title
Journal of Nuclear Materials
Serial Year
2011
Journal title
Journal of Nuclear Materials
Record number
1358775
Link To Document