Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes

The elastic-plastic behaviour of dual-phase, high-strength steel sheets under two-stage strain-path changes has been investigated. Three different loading sequences, namely monotonic, 45° tensile path changes and orthogonal tensile path changes complied by sequences of simple uniaxial tensile tests, were analysed at room temperature. From the experiments, it was found that there is a considerable reduction of the initial flow stress over the strain-path changes. The transient softening phenomenon is observed to be a function of orientation, and the period of the transient behaviour following the strain-path change is lengthened with the amount of pre-strain. A constitutive model is adopted that includes combined isotropic and kinematic hardening and is capable of describing the marked transient softening behaviour after the pre-straining. The experimental stress–strain behaviour subsequent to the strain path change is predicted with reasonable accuracy, while the model fails to accurately describe the transient, deformation-induced anisotropy in the plastic flow.