An analytical and experimental comparison of optimal actuator and error sensor location for vibration attenuation

Feedforward active control of the flexural waves in a single and L-shaped plate has been analytically and experimentally investigated. The plates are simply supported along two parallel edges, and free at the other two ends. Point forces were used to generate the primary and secondary plate excitations. The plate flexural displacement is described by a combination of a travelling wave solution and a modal expansion. The flexural wave coefficients were determined using the boundary conditions, continuity equations at the driving force locations, and continuity equations at the corner junction for the L-shaped plate. The control actuator and error sensor are optimally located in order to achieve the best control performance.