Jittering wave-packet models for subsonic jet noise

Three simplified wave-packet models of the coherent structures in subsonic jets are presented. The models comprise convected wave-packets with time-dependent amplitudes and spatial extents. The dependence of the radiated sound on the temporal variations of the amplitude and spatial extent of the modulations are studied separately in the first two model problems, being considered together in the third. Analytical expressions for the radiated sound pressure are obtained for the first and third models. s show that temporally localised changes in the wave-packet can lead to radiation patterns which are directional and which comprise high-amplitude bursts; such intermittency is observed in subsonic jets at the end of the potential core, and so the models may help explain the higher noise levels and intermittent character of the sound radiated to low emission angles for subsonic jets. By means of an efficiency metric, relating the radiated acoustic power to the fluctuation energy of the source, we show that the source becomes more powerful as its temporal localisation is increased. This result extends that of Sandham et al. (Journal of Sound and Vibration 294(1) (2006) 355–361) who found similar behaviour for an infinitely extended wavy-wall. rtinence of the model is assessed using two sets of data for a Mach 0.9 jet. One corresponds to a direct numerical simulation (DNS) of a Reynolds number 3600 turbulent jet and the other to a large eddy simulation (LES) of a Reynolds number 4×105 jet. Both time-averaged and time-dependent amplitudes and spatial extents are extracted from the velocity field of the numerical data. Computing the sound field generated by the wave-packet models we find for both simulations that while the wave-packet with a time-averaged envelope shows discrepancies of more than an order of magnitude with the sound field, when the wave-packet ‘jitters’ in a way similar to the intermittency displayed by the simulations, we obtain agreement to within 1.5 dB at low axial angles. This shows that the ‘jitter’ of the wave-packet is a salient source feature, and one which should be modelled explicitly.